Infrared Motion Detectors
Infrared motion detectors are used for automatic control of lighting in both the residential and commercial premises.
Characteristics
- Motion detectors automatically switch on lighting in case a person in movement is detected and light is needed.
- These devices bring comfort and security on the ways to houses, garages as well as for passage halls.
- The detectors switch on when there is a need of light, and turn off the light after a defined delay (set via potentiometer).
Description
- 230 V AC ~ 50/60 Hz
- Brightness: 5 to 1000 lux
- Timer: pulse, 5s to 15 min
- Contact: 10A AC1
PIR Detection Range
Installation
These detectors can be mounted on a wall, on a ceiling or in a corner. This high flexibility offer a solution to most application cases. In addition, the cable entries possibilities are also various: from the bottom, from the back and from the top.
Description
- 230 V AC ~ 50 Hz
- Brightness: 5 to 1000 lux
- Timer: 5s to 15 min
- Contact: 10A AC1
PIR Detection Range
Installation
Operating Precautions
In order to obtain optimal detection conditions, it is recommended that the following advice:
- The detector is sensitive to sun rays, wind and rain, avoid exposing to direct sunlight and rain.
- It is preferable to maintain a distance of 1m between a light source and the detector.
- The detector is sensitive to sun rays, wind and rain, avoid exposing to direct sunlight and rain.
- It is preferable to maintain a distance of 1m between a light source and the detector.
